Parts by Type

print This page

End Yokes

Filters: STYLE = UB,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
2-4-411 1310 10 1.375 1.719 1.500 2.938 UB LD Spicer
2-4-2371 1310 10 1.375 2.000 2.000 3.438 UB LD Spicer
2-4-6011 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7151 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2604-10B 7260 10 1.188 1.875 1.500 3.350 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
2904-10B 7290 10 1.188 1.875 1.500 3.375 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
3504-10B 1350 10 1.188 1.875 1.500 3.375 UB Chrysler 8.75 Billet steel, includes u-bolts and spacer (if required) LD PTI
2-4-2611X 1310 10 1.250 1.875 1.500 2.938 UB LD Spicer
3304-10 1330 10 1.375 1.750 1.750 3.188 UB Same as 2-4-4071,
U-bolt type		 LD PTI
3504-101 1350 10 1.375 1.750 1.500 3.188 UB LD PTI
N2-4-2791 1310 10 1.125 1.552 1.500 3.000 UB LD Neapco
2-4-7061 1310 10 1.250 2.000 1.750 3.281 UB LD Spicer
3-4-2801 1350 10 1.170 1.375 1.406 2.406 UB LD Spicer
N2-4-2671 1310 10 1.375 1.750 1.750 3.220 UB 20 DEGREES JOINT ANGLE LD Neapco
4-4-2941 1550 10 2.000 2.750 3.000 5.063 UB LD Spicer
3104-17 1310 17 1.310 1.739 1.181 2.595 UB GM 8.2 LD PTI
N2-4-JK02 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
N3-4-JK04 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3504-243 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
N2-4-JK06 1310 24 1.250 1.850 1.500 3.000 UB Jeep JK Conversion - Pinion Front LD Neapco
N3-4-JK08 1350 24 1.250 1.850 1.500 3.100 UB Dana 30 Front has 1.850 seal surface LD Neapco
3104-25 1310 25 1.085 1.521 1.500 2.875 UB GM 8.2 LD PTI
3104-252 1310F 25 1.098 1.812 2.625 4.375 UB Ford 8 U-bolt type LD PTI
2-4-6111X 1330F 26 1.146 1.562 1.500 3.000 UB LD Spicer
2-4-8091X 1310 26 1.146 1.552 1.500 3.000 UB LD Spicer
3104-268 1310 26 1.146 1.552 1.500 3.000 UB Dana 30, 44 takes 2-94-58X U-bolt kit, forged LD PTI
3R04-271X 3R 27 1.170 1.942 1.287 2.866 UB GM 8.2 BOP 2-94-58X Ubolt Kit Included LD PTI
3104-08 1310 28 1.218 1.812 1.200 3.460 UB Ford 7.5 LD PTI
3104-28 1310 28 1.218 1.812 2.425 4.000 UB Ford 9 Forged / .500" Counterbore LD PTI
3304-06 1330F 28 1.218 1.812 2.425 4.000 UB Ford 9 .500" Counterbore LD PTI
3504-08 1350 28 1.218 1.812 2.425 4.000 UB Ford 9 LD PTI
3104-28A 1310 28 1.218 1.812 2.155 3.850 UB Ford 9 Billet aluminum, includes u-bolts and spacer (if required) LD PTI
3504-08B 1350 28 1.218 1.812 2.155 4.100 UB Ford 9 Billet steel, includes u-bolts and spacer (if required) LD PTI
3304-281 1330F 28 1.218 1.500 2.850 4.750 UB Fits T18,T19,T98 manual transmissions LD PTI
3304-282 1330F 28 1.218 1.812 2.425 5.000 UB Ford 9 LD PTI
N2-4-FD02X 1330F 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
N2-4-FD01X 1310 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
3104-281 1310 28 1.218 1.812 2.430 4.100 UB Ford 9 takes 2-94-28X u-bolt kit, forged LD PTI
3304-283 1330 28 1.218 1.812 2.430 4.000 UB Ford 9 in takes 2-94-28X u-bolt kit, forged LD PTI
2-4-3801X 1310 29 1.276 1.875 1.500 2.938 UB LD Spicer
2-4-3781X 1310 29 1.276 1.875 1.500 2.531 UB LD Spicer
3504-60 1350 29 1.276 1.875 1.500 3.375 UB Dana 60 LD PTI
2-4-7921 1330 29 1.276 0.000 1.500 3.094 UB Coupling yoke LD Spicer
3504-60B 1350 29 1.276 1.875 1.500 3.375 UB Dana 60 Billet steel, includes u-bolts and pinion nut LD PTI
2904-291 7290 29 1.263 1.875 1.500 3.180 UB Mopar 8.75 uses 2-94-58X u-bolt kit, forged LD PTI
3104-291 1310 29 1.276 1.875 1.500 3.000 UB Dana 44, 60 takes 2-94-58X u-bolt kit, forged LD PTI
3504-293 1350 29 1.276 1.875 1.500 3.000 UB Dana 44, 60, 70 takes 3-94-18X u-bolt kit, 1.900 clearance for nut, forged LD PTI
3504-292 1350 29 1.263 1.875 1.500 3.000 UB Mopar 8.75, 9.25 takes 3-94-18X u-bolt kit, 1.650" clearance for nut, forged LD PTI
3504-07 1350 30 1.328 1.739 1.200 3.375 UB GM 8.875 LD PTI
3304-05 1330F 30 1.312 1.812 1.275 3.145 UB Ford 8.8 LD PTI
3504-07B 1350 30 1.328 1.739 1.184 3.250 UB GM 8.875 Billet steel, includes u-bolts and spacer (if required) LD PTI
3104-30 1310 30 1.312 1.940 1.150 3.160 UB GM 8.5 LD PTI
3304-30 1330 30 1.328 1.739 1.190 2.600 UB GM 8.875 LD PTI
3104-301 1310 30 1.328 1.739 1.181 2.598 UB GM 8.5 Vette LD PTI
N2-4-GM01X 1310 30 1.328 1.740 1.190 2.590 UB LD Neapco
N2-4-GM02X 1330 30 1.328 1.740 1.190 2.700 UB LD Neapco
N2-4-GM03X 1310 30 1.312 1.940 1.150 3.160 UB LD Neapco
3104-303 1310 30 1.312 1.940 1.375 2.850 UB GM 12 bolt takes 2-94-28X u-bolt kit, forged LD PTI
3504-302 1350 30 1.312 1.940 1.160 3.180 UB GM 8.5 takes 3-94-18X u-bolt kit, forged LD PTI
3504-301 1350 30 1.312 1.812 1.300 3.145 UB Ford 8.8 takes 3-94-18X u-bolt kit, forged LD PTI
4104-303 1410 30 1.590 2.200 1.650 3.950 UB GM 10.5, 14 bolt takes 3-94-18X u-bolt kit, forged LD PTI
3304-07 1330F 31 1.343 1.812 1.262 3.150 UB Ford 10.25 Double check length thru the hole LD PTI
3304-08 1330F 31 1.343 1.812 1.640 3.500 UB Ford 10.25 Double check length thru the hole LD PTI
4104-31 1410 31 1.380 1.890 2.000 3.700 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3504-31 1350 31 1.380 1.890 2.000 3.540 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
N2-4-JK01 1310 32 1.401 1.943 2.000 3.443 UB Used at transfer case on 07+ Jeep JK. Front and rear non-CV 1310 yoke.
LD Neapco
3504-35A 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 Billet aluminum, includes u-bolts and pinion nut LD PTI
3504-35B 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 Billet steel, includes u-bolts and pinion nut LD PTI
3504-35 1350 35 1.515 2.125 2.100 4.000 UB Ford 9 takes 3-94-18X u-bolt kit, forged LD PTI
4-4-4611 1550 38 1.998 2.750 1.984 4.156 UB LD Spicer